Water Treatment Chemicals Supplier
The steps to any effective wastewater treatment process can be simple to follow: Treat your wastewater to adjust the pH based on the known contaminants, add a coagulant to bond with the waste particles. If there are metal contaminants in your wastewater, add a precipitant, and then use flocculant chemicals or a polymer solution to allow the impurities to settle to the bottom of your tank. In addition, it may be essential to use a defoamer depending on the reactions during treatment. A Brite company offers a complete line of water treatment chemicals to aid in each step to reach your treatment goals.
A Brite company offers superior coagulants than most water treatment chemical suppliers. They are purposely designed to bond with the contaminates in your wastewater stream. You can refer to our list of proprietary aluminum-based coagulants below if you are looking for Aluminum Chloralhydrate (ACH) coagulants or Poly-aluminum chloride (PAC). The same can be said for those hunting for ferric sulphate. A Brite company’s proprietary water treatment additives target your contaminates during the bonding process.
If you are trying to extract metal from your wastewater, selecting the appropriate metal precipitant will be critical and we can help choose the best with jar testing lab analysis.
Finally, the correct flocculant chemicals will accentuate the bonding process and allow the contaminates to settle to the bottom of your tank. We can help demystify your search for the right anionic polymer and guide you to the correct combination.
Wastewater Treatment Chemicals that We Sell
To see some of our products, scroll down or select a category:
[category_products]
Coagulants
We offer a selection of these chemicals that allow total suspended solids to clump or coagulate so that they can be filtered out.
Bentonite Clay Powders and Blended Formulations
Our systems are primarily Bentonite clay systems that are designed to remove a range of oils, metals and suspended solids.
WBC products are based on sodium bentonite clay. They are available pure or blended with other dry chemicals to treat a wide range of wastewater streams. Polymers and other powders are mixed with clay and are time released when added to a waste stream. A series of sequential chemical reactions take place without operator intervention, saving time and labor. The entire treatment process is simplified by minimizing treatment steps and equipment needed.
WBC products will encapsulate contaminates, resulting in a sludge that is usually non-leachable and therefore non-hazardous, substantially reducing disposal cost. It removes oil and grease while reducing BOD, TSS and heavy metals. WBC products also create a strong filterable floc by allowing the floc to readily release water resulting in a drier sludge cake.
Flocculant Chemicals
These catalyst substances cause a chemical reaction with total suspended solids to encapsulate solids and allow for more complete removal.
Precipitants
We offer a full range of precipitant chemicals that are useable in most systems.